| Model |
NWA5301-NJ |
| Product name |
802.11 b/g/n Wall-Plate Unified Access Point |
| Main Design |
| Wireless frequency |
2.4 GHz |
| Radio |
1 |
| Antenna |
Embedded 2x2 |
| RF Specifications |
| Frequency band |
2.4 GHz (11 g/n) |
2.4 GHz (IEEE 802.11 b/g/n); USA (FCC): 2.412 to 2.462 GHz; Europe (ETSI): 2.412 to 2.472 GHz |
| 802.11n premium features |
- 2x2 multiple-input multiple-output (MIMO) with two spatial streams
- Maximal Ratio Combining (MRC)
- 20- and 40-MHz channels
- PHY data rates up to 300 Mbps
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- Cyclic Delay diversity (CSD) support
|
Maximum transmit power(Max. total channel)
|
US (FCC) 2.4 GHz |
23 dBm, 2 antennas |
| EU (ETSI) 2.4 GHz |
17 dBm, 2 antennas |
| Antenna gain |
5 dBi |
| Support data rate |
- 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
- 802.11n: up to 300 Mbps in MCS15 (40 MHz; GI = 400 ns)
|
| Receive sensitivity |
2.4 GHz:
- 802.11b/g, min. up to -95 dBm
- 802.11n/20 MHz, min. up to -93 dBm
- 802.11n/40 MHz, min. up to -92 dBm
|
| LAN |
| Number of 10/100 Mbps LAN ports |
Uplink |
1 x 10/100 Mbps POE port (PD) |
| Downlink |
3 x 10/100 Mbps RJ-45 ports (including one PoE PSE) |
| PoE |
Yes |
| PoE power draw |
13 W (Include 7 W for PoE PSE) |
| WLAN Security |
| WMM (Wi-Fi certified) |
Yes |
| WEP |
Yes |
| WPA/WPA2-PSK |
Yes |
| WPA2 (Wi-Fi certified) |
Yes |
| WPA/WPA2-Enterprise |
Yes |
| EAP types |
TLS, TTLS, PEAP, FAST, AKA and SIM |
| Number of multiple SSID |
8 |
| IEEE 802.1x |
Yes |
| MAC filtering |
Yes |
| Layer-2 isolation |
Yes, multiple profiles |
| RADIUS authentication |
Yes |
| Rogue AP detection |
Yes |
| Network |
| VLANs |
Yes |
| DHCP client |
Yes |
| QoS |
| WMM |
Yes |
| WMM power saving |
Yes |
| ZyXEL ONE Network |
| ZON Utility |
- Discovery of ZyXEL switches, APs and gateways*
- Centralized and batch configurations
- IP configuration
- IP renew
- Device reboot
- Device locating
- Web GUI access
- Firmware upgrade
- Password configuration
- One-click quick association with ZyXEL AP Configurator (ZAC)
|
| Smart Connect |
- Discover neighboring devices
- One-click remote management access to the neighboring ZyXEL devices
|
| Management |
| ZAC |
- Batch AP configuration
- Batch AP firmware upgrade
- Batch AP profile backup
|
| Standalone AP mode |
Yes |
| Managed AP mode** |
Yes |
| CLI |
Yes |
| Web GUI |
Yes |
| SNMP |
Yes |
| Certification |
| Radio |
ETSI EN 300 328, FCC Part 15C, LP0002, EN 60601-1-2 |
| EMC |
EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, FCC Part B, BSMI CNS13438 |
| Safety |
EN 60950-1, IEC 60950-1, BSMI CNS14336-1 |
| Physical Specifications |
| Item |
Dimensions (WxDxH)(mm/in.) |
85 x 138 x 37.4/3.35 x 5.43 x 1.47 |
| Weight (g/lb.) |
172/0.38 |
| Packing |
Dimensions (WxDxH)(mm/in.) |
200 x 141 x 64/7.87 x 5.55 x 2.52 |
| Weight (g/lb.) |
440/0.96 |
| Environmental Specifications |
| Operating temperature |
0°C to 50°C/32°F to 122°F |
| Storage temperature |
-30°C to 70°C/-22°F to 158°F |
| Operating humidity |
10% to 90% (non-condensing) |
| MTBF (hr) |
531,785 |
